header image
Home arrow Forum
MechanicBoard
Welcome, Guest
Please Login or Register.    Lost Password?
MechanicBoard Car Problems Engine Performance - Driveability
Re:Crank but NO start on 93 Jeep Cherokee 6 cyl, 4 (1 viewing) (1) Guest
Driveablitily
Go to bottom Post Reply Favoured: 2
TOPIC: Re:Crank but NO start on 93 Jeep Cherokee 6 cyl, 4
#46
Junius (Admin)
Admin
Posts: 105
graph
User Offline Click here to see the profile of this user
Re:Crank but NO start on 93 Jeep Cherokee 6 cyl, 4 2 Years ago Karma: 5  
Okay, here's the deal. If you have 12 volts at the battery and only 7 volts at the relay socket, you've got voltage drop problems between the positive side of the battery and the relay socket. Try temporarily running a new wire to the common relay terminal. If you can get get 12 volts at the relay's common terminal and if the relay is good, it should start.
 
Report to moderator   Logged Logged  
  The administrator has disabled public write access.
#48
Junius (Admin)
Admin
Posts: 105
graph
User Offline Click here to see the profile of this user
Re:Crank but NO start on 93 Jeep Cherokee 6 cyl, 4.0L 2 Years ago Karma: 5  
You're dropping voltage between the battery hot circuit and that relay common terminal... fix that and it'll start. Send me an email through the 'contact us' link and I'll try to send a schematic.
 
Report to moderator   Logged Logged  
  The administrator has disabled public write access.
#51
h2sammo (User)
Junior Boarder
Posts: 29
graphgraph
User Offline Click here to see the profile of this user
Re:Crank but NO start on 93 Jeep Cherokee 6 cyl, 4 2 Years ago Karma: 0  
i searched for this "relay common terminal" and cant really find anything useful.

what/where is this terminal? or is it just another relay?

i send you an email through "contact us"
 
Report to moderator   Logged Logged  
  The administrator has disabled public write access.
#52
h2sammo (User)
Junior Boarder
Posts: 29
graphgraph
User Offline Click here to see the profile of this user
Re:Crank but NO start on 93 Jeep Cherokee 6 cyl, 4 2 Years ago Karma: 0  
ok i undestand the common terminal is located on a 5 lead relay.

should the ASD relay common connector see 12V from its socket? It's seeing only 5V.
 
Report to moderator   Logged Logged  
 
Last Edit: 2008/08/31 06:01 By h2sammo.
  The administrator has disabled public write access.
#53
Junius (Admin)
Admin
Posts: 105
graph
User Offline Click here to see the profile of this user
Re:Crank but NO start on 93 Jeep Cherokee 6 cyl, 4 2 Years ago Karma: 5  
It should have 12 volts. Not 5
 
Report to moderator   Logged Logged  
  The administrator has disabled public write access.
#54
h2sammo (User)
Junior Boarder
Posts: 29
graphgraph
User Offline Click here to see the profile of this user
Re:Crank but NO start on 93 Jeep Cherokee 6 cyl, 4 2 Years ago Karma: 0  
ok, according to the schematic, ASD relay feeds into the PCM connector at pin 3.

battery ground to PCM connector pin 3 gives 12V indeed.

I cannot tell from the schematic where the battery is in the circuit.

is it in between the ASD relay and PCM connector or on either side of the ASD or PCM connector?
 
Report to moderator   Logged Logged  
 
Last Edit: 2008/08/31 06:18 By h2sammo.
  The administrator has disabled public write access.
Go to top Post Reply
Powered by FireBoardget the latest posts directly to your desktop
 
WEB
www.askamechanic.info
Worth 1024 words
Adam's Truck.jpg
Sponsored Links